1. Product features: Anionic Polyacrylamide series products are water-solubility linear polymers synthesized with high degree of polymerization. They are easily soluble in water, but almost insoluble in organic solvents such as stupid and ether. It has valuable properties such as flocculation, thickening, shearing, resistance reduction and dispersibility. This product is mainly used in wastewater with positively charged suspended particles and neutral to alkaline water pH. Its amide group (-CONH2) can form a hydrogen bond with many substances affinity and adsorption, which can make it bridge between the adsorbed particles, so that several or even dozens of particles are connected together, which can promote colloidal particles Aggregates into large flocs, accelerates the sedimentation of particles in the suspension, accelerates solution clarification, and promotes filtration.

Product use:
1. Industrial wastewater treatment: especially for pH value of neutral or alkaline, suspended particles in water is coarse, high concentration, positive particle charge of sewage, such as iron and steel plant, electroplating plant, metallurgical plant and coal washing plant sewage treatment, the effect is very good.
2. Drinking water treatment: due to the high sand content and turbidity of water from rivers, the use of this product can accelerate the sedimentation of sediment filtration, with less dosage of agents, low cost, no secondary pollution and other advantages.
3. Paper additives: paper dispersant, dry and wet strengthening agent, retention and filtration agent and papermaking wastewater treatment, etc.
4. The loss of starch in amylum plant and distillery lees recovery are also widely used 5
Iv. Instructions:
1.Mix the product into 0.05%-0.5% solution for later use.
2.When dissolving, the product should be evenly dispersed and stirred to help dissolving.
Increasing the water temperature can speed up the dissolution rate, but the general water temperature does not exceed 50℃.
3. The dosage of products shall be allocated according to different uses, water quality and sewage concentration.
V. Product packaging: 25kg/kraft paper bag; avoid moisture .